[周邊設備] NAS

qwe456 · 發表於 2011-8-30 18:41

ming sir....有野想請教
我想問...如果我有兩隻nas, "NAS A" & "NAS B"
router要點set...先可以在街外可以LINK到去 A 又可去到B呢?
我已經有個Domain Name!!
如...http://ricer9.xxxx.net:5000
定係要申請多一個domain name呢?

唔知你知唔知道呢??
RiceR9 發表於 2011-8-30 16:45

Not quite sure why you want to access the NAS from outside, but here's what you should do:

Assumptions:
1. Since you said http:///...., I assume that you are trying to access these two NAS on port 5000 from outside.
2. Port 5000 on both NAS A and NAS B are open.
3. You can access ports 5000 and 5001 outside, i.e. your ISP doesn't block incoming connections to ports 5000 and 5001.
4. LAN IP for NAS A is 10.0.0.2 and NAB is 10.0.0.3

Solution:
1. Using your browser, go to the set up interface for your router.
2. Open the NAT (Network Address Translation) page.
3. Create a new application rule, WAN port 5000 -> LAN 10.0.0.2, port 5000
4. Create another new application rule, WAN port 5001 -> LAN 10.0.0.3, port 5000
5. Save the changes...

Now when you go to http://ricer9.xxxx.net:5000, it should access whatever is supposed to be on NAS A; and when you go to http://ricer9.xxxx.net:5001, it should access whatever is supposed to be on NAS B.

See if this helps.